How high should a door handle be fitted.
How high is a door handle from the floor.
The international building code also requires all projections into a hallway doorway or other means of access to have a handle that fits a wheelchair use.
According to international building code 2012 door handles or knobs should be installed 34 inches 864 mm minimum and 48 inches 1219 mm maximum above the finished floor.
If the door is used for an entrance to a swimming pool the doorknobs are however suggested to place 48 to 54 inches above the floor.
The international building code has established doorknob height between 34 and 48 inches above a finished floor.
This height is measured from a finished floor.
These requirements are commonly known as dda compliance disability discrimination act more recently this has been replaced with the equality act.
All door handles pulls latches and locks should be installed at least 34 inches from the finished floor.
Exceptions to the rule include doors that provide egress into swimming pools or other water features.
The code requires that the height of a doorknob above the floor is approximately between 34 and 48 inches.
These federal regulations for door handle height state that door handles must be at least 48 inches from the floor level.
Installers typically drill the hole centered 36 inches above the floor if not specifically instructed to do so differently.
To meet the requirements of bs 8300 lever handles should be positioned on the door at 800mm to 1050 from the floor 900mm is the preferred height.
On the flip side of things your new door handle should not be higher than 48 inches above the finished floor.
Acceptable types of handles include u shaped push type and lever type handles or mechanisms.
Door handles pulls latches locks and other operating devices shall be installed 34 inches 864 mm minimum and 48 inches 1219 mm maximum above the finished floor.
